American Dryer Corp. Super AD-30 User Manual
Page 26
Advertising
22
CAUTION: The dryer must be grounded. A ground lug has been provided for this purpose.
IMPORTANT: A separate circuit serving each dryer must be provided.
The only electrical connections to the dryer are the 3-phase (3ø) leads (L1, L2, L3, and sometimes
Neutral) and ground. Single-phase (1ø) power for the control circuit is done by the factory at the
contactor (relay), and no other wiring connections are.
NOTE: Electrically heated service (amperage) specifications/requirements not available at time of
printing. Contact factory for update.
Advertising