AMX DAS-AMP4 - Manual (Page 8)

Carbon XA Amplifiers
2 Carbon XA Amplifiers
Product Specifications
Audio Switching
When no audio is present, the Carbon XA amplifier will go into Standby mode and mute the speakers after
about 5 seconds. When audio is sensed at the input, the device will un-mute the speakers and the volume may
be controlled by the keypad or remote. The switch time between muting and un-muting is approximately 200
milliseconds.
Carbon XA Product Specifications
Models Available: DAS-AMP4 4-Channel Amplifier
• US version (120V) - FG1102-01
• Int’l version (230V) - FG1102-03
DAS-AMP8 8-Channel Amplifier
• US version (120V) - FG1102-02
• Int’l version (230V) - FG1102-04
Dimensions (HWD): • 3 1/16” x 17” x 13 1/2” (7.68cm x 43.18cm x 33.52cm)
• RU: 2
Weight: 25.75 lbs (11.68 kg)
Power: • Average usage: 250 W
• Maximum: 750 W
• High current Torroidal power supply
Stereo Output: • Dual mono amplifier stage design
• 60 W per channel (1 KHz continuous .006%@ 8 Ohms THD+N)
• Each Carbon XA amplifier is capable of providing 480 watts @ 8 Ohms
Configuration: • Modular Design - configurable in single pairs up to 4 stereo pairs (8
channels).
• Stackable (up to 3 Carbon XA Amplifiers)
Control Options: • Matrix keypad
• C-Series speakers using SWT
Front Panel Components:
Status LED:
Dual stage status LED:
• Red in standby
• Green when active
Rear Panel Components:
• Power Switch & Receptacle The master power switch will remain in the ON position normally.
• Output 1-4: Euro-style connectors provide direct connection to speakers.
• From Controller: SWT input port (connects to an Mi-Series Audio Controller)
• To Keypad: SWT output port (connects to Matrix keypad or interface)
Included Accessories: Power Cord
Other AMX Equipment: DAS-MRMK Mi Series Rack Mount Kit (FG1101-60)