Konica Minolta bizhub PRESS C8000e - Manual (Page 89)

IC-601 8-5
8.1 Windows 8
% In Windows Vista/Server 2008/7, the dialog box appears to reconfirm if you are sure. Click [Unin-
stall].
10
Close the open windows, and then restart the computer.
% Be sure to restart the computer.
This completes removing the printer driver.
Reference
-
In Windows XP/Server 2003, even if the printer driver is deleted using the preceding method, the model
information file will remain in the computer. For this reason, when reinstalling the same version of the
printer driver, the driver may not be rewritten. In this case, remove the following files as well.
- Check the "C:\WINDOWS\system32\spool\drivers\w32 e86" folder ("C:\WINDOWS\sys-
tem32\spool\drivers\ e64" folder in the e64 system), and if there is a folder of the corresponding model,
remove it. If more than one printer driver is installed, the model information for all drivers is deleted. To
leave other drivers, do not remove the folder.
- From the "C:\WINDOWS\inf" folder, remove "oem*.inf" and "oem*.PNF" ("*" included in the file name
indicates a number, which differs depending on the computer environment).
Before removing these files, open the inf file, and then check the model name described on the last few
lines to confirm it is the file for the corresponding model. The number of the PNF file is the same as that
of the inf file.
- When you have deleted a file using [Remove driver and driver package.] or [Remove driver and driver
package.] in Windows Vista/Server 2008/7, this operation is not required.