Konica Minolta bizhub 43 - Manual (Page 14)

- 12 -
bizhub 43
English
Installation
Packaging contents
The packaging contains the components listed below:
• Multifunction printer
• Duplex module
• 1 toner cartridge
• 1 installation guide
• 1 installation DVD-ROM
• 1 mains cable
• 1 telephone cable
• 1 consumable leaflet
Installing the machine
1 Unpack the machine and remove all protective
shims, as illustrated in the installation guide.
2 Install the printer in a suitable place respecting the
safety instructions described in the section Safety.
3 Remove the protective plastic film from the screen,
as illustrated in the installation guide.
4 Unpack the duplex module, as illustrated in the in-
stallation guide.
5 Install the duplex module at the rear of the ma-
chine, as illustrated in the installation guide.
Installing options
Additional paper tray
Consult the installation guide supplied with this option for
installation instructions.
Perfume diffuser
The perfume unit is an option enabling you to install a
perfume diffuser on the machine. When this option is
installed and activated, the machine diffuses perfume
every hour, and for a period of time defined by you.
Consult the installation guide supplied with this option for
installation instructions.
To activate and configure this option, consult the section
Perfume setting.
Installing the toner cartridge
1 Stand opposite the machine.
2 Press the toner cartridge access button.
3 Lift up the flatbed scanner and open the access flap
to the toner cartridge.
4 Unpack the new toner cartridge and shake it gently
7 to 8 times to distribute the toner evenly through
the cartridge.
Shaking the toner cartridge carefully will guarantee
the maximum number of copies per cartridge.
5 Take hold of the toner cartridge by the handle,
place it on a flat surface and remove the cover by
pulling on it horizontally.
Caution
Before installing any options, the machine
and the option to be installed must be swit-
ched off and disconnected from the mains
power supply.
Note
Make sure you remove the toner cartridge
cover horizontally so as not to break it inside
the toner cartridge.
After removing the cover, do not shake the
toner cartridge. You may risk spilling toner.