Konica Minolta bizhub 43 - Manual (Page 9)

bizhub 43
- 7 -
English
Location conditions
By choosing an appropriate location, you will preserve the longevity of the machine. Ensure that the selected
location has the following characteristics:
• Choose a well-ventilation location.
• Ensure that the air vents located on either side of the machine and at the back of the Duplex module, are not ob-
structed. During installation, ensure that the machine is placed about forty centimetres from any object so as to fa-
cilitate opening of covers.
• Ensure that this location does not present any risk of emissions of ammonia or any other organic gases.
• The earthed socket (see safety instructions) to which you will be connecting the machine is located nearby and eas-
ily accessible.
• Ensure that the machine is not directly exposed to sunlight.
• Do not place the machine in a zone exposed to drafts of air generated by air conditioning, heating or ventilation
systems, or in a zone subject to significant differences of temperature or humidity.
• Choose a stable, horizontal surface on which the machine will not be exposed to intense vibrations.
• Keep the machine away from any objects that may obstruct the air vents.
• Do not place the machine near drapes or other flammable objects.
• Choose a location where the risks of splashes of water or other liquids are limited.
• Ensure that this location is dry, clean and dust-free.
Precautions for use
Take account of the important precautions below when using the machine.
Operating environment
The following section describes the operating environment required for the machine:
• Temperature: 10 °C to 32 °C [50 °F to 89.6 °F] with ambient humidity of between 15 and 80 % (up to 65 % ambient
humidity for a temperature of 32 °C [89.6 °F]).
Precautions for using the machine
The following section describes the precautions to be taken when using the machine:
• During printing, never switch the machine off or open its covers.
• Never use gas or flammable liquids, or objects which may generate a magnetic field around the machine.
• When disconnecting the mains cable, always take hold of the plug without pulling on the cable. A damaged cable
presents a potential risk of fire or electrical discharge.
• Never touch the mains cable with wet hands. You risk getting an electric shock.
• Always disconnect the power cable before moving the machine; Otherwise, you risk damaging the cable and cre-
ating a risk of fire or electric shock.
• Always disconnect the mains cable if you do not plan to use the machine for a prolonged period of time.
• Never place objects on the mains cable, and never pull on it or fold it. This may cause a risk of fire or electric shock.
• Ensure that the machine never lies on the mains cable or the communication cables from any other electrical appli-
ances. Also ensure that no cables are inserted into the machine mechanism. This may prevent the machine from
operating correctly or create a fire hazard.
• Never try to remove a fixed panel or cover. The machine contains high voltage circuits. Any contact with these cir-
cuits may lead to a risk of electric shock.
• Never try to modify the machine. This may cause a risk of fire or electric shock.
• Ensure that all paper clips, staples or other small metal parts do not enter the machine through the air vents or other
openings. These objects may generate a risk of fire or electric shock.
• Prevent any water or other liquids from being spilled on or near the machine. Any contact of the machine with water
or liquid may cause a risk of fire or electric shock.
• If liquid or a metal part accidentally penetrates the machine, switch it off immediately, disconnect the mains cable
and contact your retailer. Otherwise, you may be exposed to a risk of fire or electric shock.