Konica Minolta KIP Color 80 - Manual (Page 10)

KIP Certified AutoCAD Driver
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP.  2012 KIP. vii_iv
- 10 -
If the user does not wish to migrate or does not have any PCP or PC2 files, click the “Next” button
and proceed with the installation.
7. Output Port Selection: select the IP connection, which is created at the time the KIP Windows driver
is installed.
8. Specify the printer’s name. Since all of the KIP printers use the
same driver, the user could set up a name for each KIP
device. We recommend you use the nomenclature of your
KIP machine to identify the printer’s name.
Example: KIP5000
9. To complete the installation, click the Finish button. Printer
configuration will be done later and there is no need to
“Calibrate Plotter” as the KIP printer was calibrated during
installation by the technician.
NOTE
The KIP Port Monitor should be installed prior to the AutoCAD
driver to use this port. If the user chooses not to use this
method, select Plot to File