Konica Minolta KIP Color 80 - Manual (Page 16)

KIP Certified AutoCAD Driver
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP.  2011 KIP.
- 16 -
5. The following dialog boxes allow the user to locate and
connect to a KIP Printer by selecting it from the list and
clicking “OK.” The winreq.ini dialog box will only show the
printers that are checked in the list of printers in KIP
Request. By checking the Network dialog box the list will
contain all KIP printers available on the network. If the KIP
printer does not show up in this list it can be added by
checking the “Use IP Address” dialog box and entering the
IP address of the printer.
6. Select “OK” to finish linking the HDI driver to Request.
7. Checking the Retrieve Accounting data from printer will
activate the KIP Track for the AutoCAD driver. This will pull
in any information that has been sent to the printer along
with requirements for printing and use them within
AutoCAD.
8. The KIP custom settings dialog box should display “Real Time Status” from the KIP printer. Users have
the ability to track printing from the AutoCAD application by Requester, Job Number, and
Description. Users also have the ability to add a stamp to their document from the KIP HDI driver.