Konica Minolta bizhub C284e - Manual (Page 116)

Authentication Manager 3
Authentication Manager 3-99
2
Reminder
The authentication account must be specified using the full path for
LDAP depending on the LDAP server type.
Example:
LDAP://uid=user01,ou=ou1,dc=domain1,dc=example,dc=com
In this case, Authentication Manager can create the full path for LDAP
from the following information, and then perform authentication.
- Value specified for "Authentication Search Base" (Example:
ou=ou1,dc=domain1,dc=example,dc=com)
- Value specified for "Discovery Attribute" (Example: uid)
- User name typed in from the device (Example: user01)
In this case, select the "Use Authentication Search Base and Discovery
Attribute for authentication" check box, and then specify authentication
search base and discovery attribute.
For information on whether this setting is required, check the
authentication method for your LDAP server.
Port Number (SSL) Specify the port number to be used for connecting to the
external server (SSL/TLS connection).
Use Authentication Search Base
and Discovery Attribute for au-
thentication Specify whether to use authentication search base and dis-
covery attribute for authentication account.
Selecting this check box uses authentication search base
and discovery attribute to create an account, and then per-
form authentication.
Prefix Type in a prefix when using search setting for authentica-
tion account. (Enabled only when the "Use Authentication
Search Base and Discovery Attribute for authentication"
check box is selected)
Function Details