Konica Minolta bizhub C284e - Manual (Page 30)

Authentication Manager 3
Authentication Manager 3-13
2 ##DispName Enter item titles to be displayed in a page. Type in "## Dis-
pName", "User Group Name", "User Name", "Description",
"External Server Name", "Password", "Synchronize or not
when Account Name is being authenticated", "Account
Name", "E-mail Address", "Home", "Maximum Number of
Box", "Apply Levels to Destinations", "Card Type 1", "Card
ID 1", "Card Type 2", "Card ID 2", "Card Type 3", "Card ID
3", "Biometric Unit No.", "Biometric Information Acquisition
Device Name 1", "Biometric Information Type 1", "Biomet-
ric Information 1", "Biometric Information Acquisition De-
vice Name 2", "Biometric Information Type 2", "Biometric
Information 2", and "Pin Code" to the right of the first col-
umn of the second row.
3 ##CharacterLimit Type in the number of characters for each item. Enter "##
CharacterLimit", "256chars", "64chars", "127chars",
"32chars", "64chars", "0-1", "32chars", "129chars",
"170chars", "0-1000", "0-5", "255", "64chars", "255",
"64chars", "255", "64chars", "1-9999", "64chars", "0-10",
"752chars", "64chars", "0-10", "752chars", and "64chars"
to the right of the first column of the third row.
4 o ##DataName Enter item titles to perform the database-based manage-
ment. Enter "## DataName", "TrackName", "UserName",
"Description", "ServerName", "UserPassword", "Synchro-
nizedAccountFlag", "AccountName", "MailAddress",
"HomeFolderName", "BoxLimitCount", "RefLevel",
"CardType1", "CardID1", "CardType2", "CardID2",
"CardType3", "CardID3", "BioGroupNo", "BioDevice1",
"BioType1", "BioInfo1", "BioDevice2", "BioType2",
"BioInfo2", and "PinCode" to the right of the first column of
the fourth row.
5 User Group Name Type in the name of the group that the user belongs to.
6 o User Name Type in a user name.
7 Description Type in a description of the user.
External Server
Name If user authentication is performed by using an external
server, type in the name of the external server.
Password Type in the password necessary for logging on.
2
Note
All passwords for the file exported using the
[Export] button will be shown by "+" (single-
byte). To change the password, delete "+", and
then type in a new password.
If you do not change the password, "+" must be
used as it is.
For an additional new password, the "+" char-
acter cannot be used.
No. Re-
quir
ed Function Details