Directly specifying an e-mail destination, Directly specifying an e-mail destination -11, P. 5-11 – Konica Minolta bizhub C650 User Manual
Page 167
Advertising
C650
5-11
Sending a user box document
5
6
Select the desired destination, and then touch [OK].
Directly specifying an e-mail destination
2
Note
If "Manual Destination Input" (displayed by touching [Security Settings] on the Administrator Settings
screen, then [Security Details]) is set to "Restrict", [Direct Input] does not appear.
1
From the Use Document screen, select the document to be sent, and then touch [Send].
2
Touch [E-Mail] on the Direct Input tab.
A screen appears, allowing you to type in the address of the destination.
3
Type in the address of the destination, and then touch [OK].
–
To specify additional destinations, repeat steps 2 and 3.
Advertising