Konica Minolta bizhub 20 - Manual (Page 17)

17
Windows
® Parallel
Windows
®
Parallel
For Parallel Interface Users
(Windows
®
2000 Professional/XP/XP Professional x64 Edition)
15
Before you install
a
Make sure that your computer is ON and you
are logged on with Administrator rights.
b
Turn off and unplug the machine from the AC
outlet and disconnect it from your computer, if
you already connected an interface cable.
16
Install Muiti-Function
Suite
a
Put the supplied CD/DVD-ROM into your
CD/DVD-ROM drive. The opening screen will
appear automatically. Choose your language.
b
The CD/DVD-ROM main menu will appear.
Click Initial Installation.
c
Click Install Multi-Function Suite.
IMPORTANT
• DO NOT connect the Parallel cable yet.
• If there are any programs running, close
them.
• Make sure a USB Flash memory device is
not inserted into the machine.
• The screen may differ depending on the
operating system.
• The supplied CD/DVD-ROM includes
ScanSoft™ PaperPort™ 11SE. This software
supports Windows
®
2000 (SP4 or greater),
XP (SP2 or greater) and XP Professional x64
Edition. Update to the latest Windows
®
Service Pack before installing Multi-
Function Suite.
Note
If the KONICA MINOLTA screen does not appear
automatically, go to My Computer (Computer),
double-click the CD/DVD-ROM icon, and then
double-click Start.exe.
Note
If the installation does not continue automatically,
open the main menu again by ejecting and then
reinserting the CD/DVD-ROM or double-click the
Start.exe program from the root folder, and
continue from
c to install Multi-Function Suite.