Konica Minolta bizhub C25 - Manual (Page 188)

Scanning With the Machine 7-9
3
Specify the desired scan settings.
d
For details on specifying the destination of the data, refer to
“Specifying the Data Location” on page 7-10 and “Specifying the
Destination Address (Scan to E-mail/FTP/SMB)” on page 7-12.
For details on selecting the data format, refer to “Selecting the
Data Format” on page 7-27.
For details on selecting the scan quality setting, refer to “Selecting
the Scan Quality Setting” on page 7-28.
For details on setting duplex (double-sided) scanning, refer to
“Setting Duplex (Double-Sided) Scanning” on page 7-30.
For details on setting the scan size, refer to “Setting the Scan
Size” on page 7-31.
For details on setting the color of the scan data, refer to “Setting
the Scan Color” on page 7-31.
For details on specifying the subject when sending data, refer to
“Specifying the Subject” on page 7-31.
4
To scan color scans, press the Start (Color) key. To scan monochrome
scans, press the Start (B&W) key.
If the document was loaded in the ADF, scanning begins, and then the
data is sent to the specified location. If the document was placed on the
original glass, continue with step 5.
d
The Scan to PC operation can be used only if this machine is con-
nected to a computer with a USB cable.
d
If [SCAN TO E-MAIL], [SCAN TO USB] or [SCAN TO SERVER] in
[ADMIN. MANAGEMENT]/[PASSWORD SETTING]/[FULL FUNC.
NO.] has been restricted, type in the number specified for [FULL
FUNC. NO.] after pressing the Start key.
5
When [NEXT PAGE?] appears in the message window, place the second
document page on the original glass, and then press the Select key.
d
When scanning with the Scan to PC operation, a multi-page doc-
ument cannot be scanned with the original glass. To scan a
multi-page document, load the document into the ADF.
6
Press the + or , key to select the size of the document positioned in
step 5, and then press the Select key.