Konica Minolta bizhub PRO 2500P - Manual (Page 8)

8 Chapter 1 Introduction
What you can do with this machine
What you can do with this machine
Introduction
[1]
[1]
The Booklet maker, Trimmer, and SquareFold module form a booklet making
system that works online with copiers or printers.
The printouts from the copier or printer are transported sheet by sheet into the
Booklet maker and collected in the stapler area of the Booklet maker. The Booklet
maker now jogs and then staples the set. The set is then transported further to the
folding area where the set is folded into a booklet and then fed out to the belt stacker.
When a larger number of sheets are folded, an effect called creeping occurs. In order
to rectify creep, the Trimmer can be connected to the Booklet maker. The booklets
are then transported from the Booklet maker into the Trimmer where the front edge
(face) will be cut off. Another option, the SquareFold module, can be installed if a
Trimmer is installed on the Booklet maker. The prints, which have been stapled,
folded and trimmed, will be fed into the SquareFold module. The SquareFold
module will flatten the spine of the booklet into a square shape. The booklets will,
after passing through the SquareFold module, have the look of a perfect bound book.
The booklets are then fed out to the belt stacker.
Number Description
1 Booklet maker
2 Trimmer
3 SquareFold module
4 Belt Stacker
5 Rotator module