Konica Minolta bizhub PRO 2500P - Manual (Page 98)

98 Chapter 8 General remarks
SquareFold module
Clean the feed belts
[49]
Step Action Description
1 Open the top cover. [94]
[94] Upper feed belts in normal position
[95]
[95] Upper feed belts raised
2 Clean the upper feed
belts (1). The upper
feed belts can be easily
rotated in either
direction.
3 Lift up the upper feed
belts to access the
lower feed belts.
4 Clean the lower feed
belts (2). Rotate the
lower feed belts
towards the outfeed
side for complete
cleaning.
5 Place the upper feed
belts in the normal
position.
6 Close the top cover.