Konica Minolta bizhub PRO 2500P - Manual (Page 41)

41
General
SquareFold module
General
Introduction
The SquareFold module has five different settings. It can be set to [Auto], [Mode 1],
[Mode 2], [Mode 3] or [Off].
In [Auto] mode, the booklet maker detects how many sheets there are in the booklet,
and automatically sets the SquareFold module to the correct mode.
Note: When the SquareFold module is set to [Auto] and the booklet has less than
approximately 6 sheets/ booklet, the SquareFold module will bypass the Square
folding action, transporting the booklet out to the Belt stacker.
Use the manual modes to override the auto function. There are four different manual
modes to select from.
[27]
Select [Off] to bypass the SquareFold module
Mode Description
1 Approximately 6 to 10 sheets.
2 Approximately 11 to 15 sheets.
3 Approximately 16 to 20 sheets.
4 Approximately 21 to 25 sheets.
5 Approximately 26 to 30 sheets. Only for booklets containing 60 - 75 g/m 2
paper.
Note: A technical adjustment is required to enable 26 - 30
sheet booklets to run.