Document Outline

• IC-310 Quick GUIDE
• Table of contents
• 1 Introduction
  • 1.1 Welcome
    • 1.1.1 Procedural instruction
    • 1.1.2 Notations and symbols used in this manual
  • 1.2 Configuration and Usage of this Guide
    • 1.2.1 HTML User's Guide operating environment
      • Supported Operating Systems/Browsers
      • Display resolution
    • 1.2.2 Conventions used in this guide
  • 1.3 Make a Note about This Machine Information
    • 1.3.1 Checking the mounted optional devices
    • 1.3.2 Checking network information
      • Printing out the Configuration Page Print
• 2 Before Getting Started
  • 2.1 Turning the Power ON/OFF
    • Power supply
    • Turning the power on
    • Turning off the power
    • Power saving function
  • 2.2 Available Operations in this Machine
    • 2.2.1 Major functions of this machine
      • Print functions
      • Copy functions
      • Scan functions
      • Hold function of print jobs using the HDD
      • Device control function (Web Tools)
    • 2.2.2 Application functions
      • Fiery Command WorkStation
      • Printer Delete Utility
      • Fiery Remote Scan
      • Fiery Hot Folders
• 3 Let's Make Prints
  • 3.1 Printing Flow
    • Step 1: Prepare the printer driver and applications
    • Step 2: Load paper into a tray
    • Step 3: Configure information of the paper loaded into a tray in this machine
    • Step 4: Use the printer driver to print data
    • Step 5: Check the finishing
• 4 Installing Software
  • 4.1 Installing the Printer Driver
    • 4.1.1 Operating environment
      • In a Windows environment
      • In a Macintosh environment
    • 4.1.2 Characteristics of printer driver
    • 4.1.3 In a Windows environment
      • Installation
      • Default setting
    • 4.1.4 In a Macintosh environment
      • Installation
      • Default setting
  • 4.2 Installing Applications
    • 4.2.1 Operating environment
      • Fiery utility
    • 4.2.2 Fiery Utility setup
      • Function overview
    • 4.2.3 In a Windows environment
      • Installation
    • 4.2.4 In a Macintosh environment
      • Installation
    • 4.2.5 Starting applications
      • Starting Fiery Command WorkStation
      • Starting Fiery Remote Scan
      • Starting Fiery Hot Folders
• 5 Basic Operations
  • 5.1 Loading Paper
    • 5.1.1 Loading paper into the Paper Feeder Unit PF-708
    • 5.1.2 Loading Paper in Post Inserter of Folding Unit FD-503
  • 5.2 Paper Setting
    • 5.2.1 Specifying paper information for a tray
  • 5.3 Printer Driver Setting
    • 5.3.1 Printer driver functions
      • [Color Mode]: Select an output color
      • [Color Mode]: General
      • [Color Mode]: Expert Setting
• 6 Maintaining the Finishing Quality
  • 6.1 Both Sides Adjustment
    • 6.1.1 Both Sides Adjustment
    • 6.1.2 Adjustment flow
    • 6.1.3 Making the Both Sides Adjustment for each tray
      • Chart Adjustment
      • Zoom and Image Shift Adjustment
  • 6.2 Image Quality Adjustment
    • 6.2.1 Image Quality adjustment
      • To manage the daily image quality:
      • To specify the reference image quality:
    • 6.2.2 Daily image quality management (Calibration)
      • Calibration timing
      • Executing calibration
    • 6.2.3 Color Density Control
      • Auto setting of Color Density Control
      • Manual setting of Color Density Manual Control
    • 6.2.4 Executing calibration using the image controller
    • 6.2.5 Specifying the reference image quality
    • 6.2.6 Particular adjustment
  • 6.3 Adjusting the Finisher and Saddle Stitcher
    • 6.3.1 Opening the screen to be adjusted
      • Adjustable settings
• 7 Troubleshooting
  • 7.1 Replenish and Replace Consumables
    • Replacing a toner bottle
    • Replacing a staple cartridge
    • Replacing a waste toner box
  • 7.2 Clearing Paper Jams
    • 7.2.1 How to view the animation guide
      • [JAM Position] screen
      • Illustration screen for Jam handling
  • 7.3 If the Specified Paper is not Found
  • 7.4 If an Error has been Displayed during Scanning
    • HDD space insufficiency
  • 7.5 Hue Adjustment
    • 7.5.1 When calibration is executed for daily management
    • 7.5.2 When calibration is not executed
  • 7.6 Image Position Adjustment
• 8 Appendix
  • 8.1 Good Use of the [HTML User's Guide]
    • (1) Let's master the search function!
    • (2) Confirm the setting required for the target finishing in an operation example!
  • 8.2 Name of each Component
    • 8.2.1 External components
    • 8.2.2 Internal components
    • 8.2.3 Control Panel Layout
  • 8.3 Convenient Use of Scan Function (Scan to SMB)
    • Step 1: Prepare the destination computer
    • Step 2: Connect this machine to the network
    • Step 3: Prepare the operating environment for SMB transmission
    • Step 4: Configure settings according to your environment
    • Step 5: Send scan data to a public folder
  • 8.4 Major Specifications
    • 8.4.1 Machine
    • 8.4.2 Feeding-related optional devices
      • Paper Feeder Unit PF-707
      • Paper Feeder Unit PF-708
      • Post Inserter (Folding Unit FD-503)
      • Post Inserter PI-502
    • 8.4.3 Output-related optional devices
      • Relay Unit RU-511
      • Relay Unit RU-510
      • Folding Unit FD-503
      • Large Capacity Stacker LS-506
      • Saddle Stitcher SD-506
      • Perfect Binder PB-503
      • Finisher FS-532
      • Multi Puncher GP-501
      • Auto Ring Binder GP-502
    • 8.4.4 Electronic optional devices
      • Image Controller IC-602
      • Image Controller IC-308
      • Image Controller IC-310
      • Authentication Unit AU-201
    • 8.4.5 Original-related optional devices
      • Reverse Automatic Document Feeder (ADF)
  • 8.5 Weight for each size
    • Weight for each size
  • 8.6 Maximum paper size and printing area