Konica Minolta MAGICOLOR 2300 - Manual (Page 58)

Replacing Consumables 50
Level during storage.
Do not stand or store cartridges on their ends or turn them upside down;
the toner inside the cartridges may become caked or unequally
distributed.
Away from salty air and corrosive gases such as ammonia.
Procedure
You can use this procedure to replace either an empty toner cartridge or one
that is not empty.
You may want to replace a toner cartridge that is not empty if the consumable
monitor in your printer driver or the Status Display indicates that a particular
color cartridge is running low and you need to print a lengthy job when no one
will be available to change the cartridge.
Attention
Be careful not to spill toner while replacing a toner cartridge. If toner
spills, immediately wipe it off with a soft, dry cloth.
1
Open the Status Display, and then check which toner color is empty.
2
From the Print tab choose Toner Replace...
3
Make sure that the Change Capacity only check box is cleared.
4
In the Color list box, select the color of the toner cartridge to be replaced
(CYAN, MAGENTA, YELLOW, or BLACK).
5
Click OK.
6
When the toner indicator on the con-
trol panel starts flashing, open the
printer’s front door.
The carousel is automatically
repositioned so that the appropriate
toner cartridge can be removed.