Konica Minolta MAGICOLOR 2300 - Manual (Page 96)

Solving Other Problems 88
Media is
wrinkled. The media is moist
from humidity or
having water spilled
on the paper supply. Remove the moist media and replace it
with new, dry media.
The transfer roller or
fuser unit may be
defective. Check them for damage. If necessary,
contact Technical Support with the
error information. Go to http://
printer.konicaminolta.net/support or
see the Service & Support Guide for
support telephone numbers.
Unsupported media
is being used. Use KONICA MINOLTA-approved
media. Refer to “Media Types” on page
12. Check http://
printer.konicaminolta.net/support (click
on “Answer Base”) for currently
approved media.
Symptom Cause Solution