Konica Minolta KIP 3100 - Manual (Page 27)

Chapter 2 Basic Operation 2-7
4. Push both levers (3) down in either way. Position them flat against the flange to secure the roll
media.
5. Lift the roll media by holding both Flanges. Lower the Flanges onto the Slide Guides (2) in the
roll deck.
NOTE
(1) Note the rewinding direction.
Correct: Edge comes from bottom Wrong: Edge comes from top
(continued on the next page)
3 3
2
Rear: Deck back Rear: Deck back
Front: to Guide Plate Front: to Guide Plate