Audiovox VOH1042 DL - Manual (Page 5)

FRONT PANEL FEATURES – See Figure 1
1. Power Button – (Bright red when system is ON, dim
when system is OFF).
2. Channel Up/Down – Changes the TV channel.
3. Auto Program Switch (AP)– Auto Program used to
program local channels into TV memory. Press when
vehicle is in a new location.
4. Sensor Eye – Allows the remote control to operate
the VOH802 DL’s OSD system (On Screen Display),
volume to Wired Headphone Jacks (and optional
external speakers), and for control of Video Media
Player and other accessories.
5. Three Position Dome Light Switch
• Auto – Automatically switched on the dome lights
in conjunction with the vehicle’s interior
illumination.
• Off – The Dome lights will not turn on in this
position.
• On – Turns on the Dome lights.
6. Screen release – Slides in the direction of the
arrow to release the drop down screen.
7. TV/AV– Any video equipment connected to the
AUDIO/VIDEO inputs can be used with the TV by
pressing this button. Each time the button is pressed
the Audio/Video source will change in the following
sequence VIDEO 1, VIDEO 2 and TV.
8. Volume Up/Down – Controls Volume to Headphone
Jacks and external Speakers if connected. Also, used
to adjust the picture control setting when “contrast”,
“bright”, “color” or “tint” is displayed on the screen.
9. Infrared Transmitter – Used to transmit audio to
Wireless Headphones.
10. Picture Select – Each time this button is pressed,
the screen picture adjustment display cycles through
“adjustment bars” for CONTRAST, BRIGHTNESS,
COLOR, and TINT. Once the desired adjustment bar
is displayed, use the VOLUME UP/DOWN buttons to
adjust the setting. The display will automatically turn
off if no adjustments are made within 6 seconds, or if
any other button is depressed.
11. Dome Lights – Provide additional illumination.
-4-