Konica Minolta bizhub C650 - Manual (Page 49)

C650 3-2
Setting up network printing 3
2
Note
For details on the NetWare functions, refer to the NetWare operation manual.
With Macintosh
You can print from your Macintosh computer using LPR, AppleTalk, or Bonjour/Rendezvous.
You can also connect this printing system to a print server in an AppleTalk or a Bonjour/Rendezvous
environment and send print jobs from the Macintosh computer to this machine.
Network connection methods that can be selected in each Windows operating system
This chapter describes the settings that must be specified for network printing.
Setting procedures differ depending on the method of networking printing used (SMB, LPR, or IPP printing).
Select the best method of network printing for your Windows environment.
Network printing from a Windows operating system
2
Reminder
Before setting up network printing, install the printer driver. For details on installing the printer driver,
refer to "Installing the printer driver" on page 2-1.
To perform network printing, change the printer port for the installed printer driver to one for a network
connection, and then change the settings on this machine as necessary.
For an IPP connection, it is necessary to install the printer driver first.
Network printing in a NetWare environment
Protocol
used Windows 2000 Windows
XP/Vista Windows NT
4.0 Windows Serv-
er 2003
SMB printing TCP/IP, Net-
BEUI o o o
LPR printing TCP/IP o o o o
IPP printing TCP/IP o o o
Port 9100 print-
ing TCP/IP o o o
NetWare version Protocol used Emulation Service mode
NetWare 4.x IPX NDS/Bindery PServer/Nprinter
NetWare 5.x/6 IPX NDS PServer
TCP/IP NDPS (lpr)