Konica Minolta bizhub C650 - Manual (Page 74)

C650 3-27
Setting up network printing 3
8
In the NetWare Settings screen, touch [User Authentication Setting (NDS)], and then specify settings for
the following. After specifying the settings, touch [Close].
– User Authentication Setting (NDS): Select [ON]. (Depending on the network environment, select
[OFF].)
9
In the NetWare Settings screen, touch [Close].
10
Restart this machine (turn the main power off, then on again).
11
Use the NetWare server console to load MONITOR.NLM.
12
Select the connection information and, in the active connection column, check that the created PServer
is connected.
2
Reminder
When turning the power off, then on again, wait at least 10 seconds before turning the power on again;
otherwise, this machine may not function properly.
For NetWare 5.x/6 Novell Distributed Print Service (NDPS)
2
Note
Before specifying settings for NDPS, check that the NDPS broker and NDPS manager have been
created and loaded.
Also, before performing the following procedure, check that the TCP/IP protocol has been set in the
NetWare server, and check that the IP address has been set for this machine and that this machine is
on.
1
Log on to NetWare as an administrator from a client computer.
2
Start up NWadmin.
3
Right-click the organization or organizational unit container where you will create the printer agent, and
then click "NDPS Printer" on the "Create" sub-menu.
4
In the "NDPS Printer Name" box, enter the printer name.
5
In the "Printer Agent Source" column, select "Create a New Printer Agent", and then click the [Create]
button.
6
Check the printer agent name, and then in the "NDPS Manager Name" box, browse through the NDPS
manager names, and register one.
7
In "Gateway Types", select "Novell Printer Gateway", and then register it.