Konica Minolta eCopy - Manual (Page 16)

12 | Installing and configuring the connector
To configure authentication:
1 On the Configure tab, click New.
The Create a new Destination window opens.
2
Enter a Name for the new destination.
This is the destination name seen by the user at the device
3
Specify the Authentication settings for the new destination (see Table 2).
TABLE 2. Authentication settings
Field Name Description
User Name
and Password When you create locations in Interwoven WorkSite, you set up credentials for users who
have access to the information stored in each location. The user name and password that
you enter here must provide access to the location referenced by this destination. The user
name and password are also used to access the list of names used for the Search while
typing function at the device.
If you change this information on the WorkSite server, you must also change it for this
connector profile.
Server The WorkSite server to which the connector profile will connect.
Type ■ Logon As: All documents scanned and stored to this destination use the credentials that
you enter in the User name and Password fields. The user is not required to log on at
the device. If this option is selected, the Use Trusted Login option is not available.
■ Runtime: Prompts the user during each session at the device to provide logon
credentials before storing the file
Test Verifies the authentication information against the WorkSite server. If the test is successful,
Document Storage, Document Properties, and OK become active.
Search while
typing Enables or disables the Search while typing option at the device.
Use Trusted
Login Enables the use of the trusted login feature supported by WorkSite, which allows users to
authenticate using their Windows user name and password. If selected, the trusted login
settings are used when a user logs on to the connector at the device.
This option is only available if the Runtime option is selected in the Type field. If the Use
Trusted Login option is not selected, the Impersonation Password and Windows/Novell
fields are not active.
Impersonation
Password The Administrative Impersonation password for the WorkSite server that is required for the
use of Trusted Login.
Windows/
Novell The operating system against which the connector should authenticate when using trusted
logon. The default is Windows.