Konica Minolta eCopy - Manual (Page 29)

eCopy Connector for Interwoven WorkSite Administrator’s Guide | 25
Index and Store
The indexing feature of the WorkSite Connector uses two screens. The first screen always shows
the Database, Description, Class, and Subclass fields. All other fields are available from the
second screen. Required fields are indicated by an “exclamation point” icon.
1
If the Document Profile window opens, enter or select the appropriate information in the
Description, Class, and Subclass fields, and press Next.
2
On the second Document Profile window enter or select the appropriate information in
the available fields and press Next.
The indexed document is stored in the selected destination.
3
If configured to do so, the connector displays a confirmation message with the ID number
of the stored document.
4
Press OK and then select one of the post-scanning options.
Note: You can only enter information in the Database field if you select Document Worklist as the
destination.
If there are more user-modifiable fields than can fit
on the screen, up and down arrow buttons appear,
allowing you to
view the
subsequent fields.
If the arrows are
active, this
indicates that
there are more
fields on the
following screen.
2
1
3
4