4 copy count – Konica Minolta KIP 2100 Scanner User Manual
Page 39
Section 2 Copy Mode - Monochrome
2-11
2.4 Copy Count
In this region the number of copies, and set copy / collation can be set.
2.4.1
Arrows - Count Increase / Decrease
Use the arrows to increase or decrease the total numbers of copies desired by one
with each press of the button.
In this example the arrow was pressed seven times to reach “8 copies”.
2.4.2
Number Pad - Count Increase / Decrease
Press the “number of copies” value (which is a button) to set the desired number of
copies using a number pad. This will allow the quick entry of larger numbers.
a) Press the numbers for the quantity desired.
(up to 999)
b) Select “Enter”.
c) If an entry error was made press “C” to start
again.
d) If you wish to close the screen without
changing the quantity press “Cancel”.
2.4.3 Set
Copy
a) To enable collated sets or copy sets to be printed select the Set Copy button.
b) As originals are scanned, the total number in the set is displayed.