7 length – Konica Minolta KIP 2100 Scanner User Manual
Page 50
Section 2 Copy Mode - Monochrome
2-22
2.7 Length
Two methods determine the length of the copy in the KIP printer. These two methods
are Auto (may also be known as Synchro Cut or Automatic Cut) and Standard Cut.
2.7.1 Auto
This mode allows the media length to be determined by the
original length. This also takes into consideration any
enlargements or reductions that are applied to an image as
well, to prevent excess media without image.
2.7.2 Standard
This mode allows the media length to be determined by a standard length or a
length set manually by the user with a number pad.
a) Select Standard Cut. A sub screen will appear. When Standard is used, the roll
must also be selected.
- If Auto Roll is selected in the Media region the following screen will appear,
prompting the media to be selected. Select the roll.
NOTE
Auto Length works in conjunction with Auto Roll
noted in 2.6.1.