Altinex MT110-103 - Manual (Page 22)

MULTITASKER
400-0197-006 21
7.3. SUMMARY OF COMMANDS
Basic Commands
1) [VER] Display software version
2) [C] Display card status
3) [CnS] Save card settings
4) […S] Save the command being sent
5) [CLR] Reset card to default values
6) [TEST] Test internal memory ICs
7) [HELP] Display available commands
Feedback Commands
8) [FBD] Feedback delay on/off
9) [?] Show system cards
10) [?C] Show card information
11) [STA1] Enable auto feedback
12) [STA0] Disable auto feedback
13) […F] Show command feedback
Card Control Commands
14) [MAT] Set/show matrix configuration
15) [ON] Turn on one or more outputs
16) [OFF] Turn off one or more outputs
17) [IO] Connect an input to output
18) [IO*] Connect an input to all outputs
19) […P] Set the path, preload for [SW]
20) [SW] Switch preloaded output buffer
21) [OSI] Set input offset
22) [OSO] Set output offset
23) [VLO] Set absolute output volume
24) [SEL] Select input volume to adjust
25) [ + ] Increment volume
26) [ - ] Decrement volume
27) [MUT0] Output volume ON
28) [MUT1] Output volume OFF
Volume Ramping Commands
29) [RUP] Ramp UP to maximum
30) [RDN] Ramp DOWN to minimum
31) [RUPm] Ramp UP to maximum
32) [RUPm=] Ramp UP to a value
33) [RDNm] Ramp DOWN to minimum
34) [RDNm=] Ramp DOWN to a value
35) [RST] Stop ramping
36) [RAMP] Display ramp rate
37) [RAMP=] Set ramp rate
ID Commands
38) [RSI] Reset Card IDs
39) [SIDn] Set all Card IDs
40) [SIDnCi] Set one Card ID
41) [SID+] Set Card ID offset
42) [RSN] Read Card slot number
Group Commands
43) [WR] Groups multiple cards
44) [RMC] Remove members from group
45) [RMG] Delete group
46) [RD] Displays group members