Konica Minolta bizhub 222 - Manual (Page 207)

10 Utility mode
10-24 362/350/282/250/222/200
Utility mode
Chapter 10
– DP10: Select this setting when using a phone line with a dialing
speed of 10 pps.
– PB: Select this setting when using a push-button line.
12
Check the information to
be registered, and then
touch [Enter].
To change a setting,
touch the button for the
setting to be changed,
and then specify the new
setting.
13
Touch [Enter] in each screen until the standby screen (initial screen) ap-
pears.
2
Note
The registered machine telephone number can be changed by following
the same procedure used to register it.