Konica Minolta bizhub 222 User Manual
Page 238
Utility mode
10
362/350/282/250/222/200
10-55
Utility mode
Chapter 10
5
Touch [G3].
–
If the optional fax
multi line is being
used, two general
subscriber lines can
be used. Specify set-
tings for each port:
“G3-1” (port 1) and
“G3-2” (port 2).
–
To specify settings
for documents sent
through the network
(such as Internet faxes), touch [Network].
–
If software switch settings were specified to block faxes received
from senders other than those specified, only the setting for “Net-
work” can be specified. For details on the software switch settings,
refer to “Specifying software switch settings (machine functions)”
on page 10-67.
6
Select whether or not
document management
is performed.
–
If document man-
agement is set to
“YES”, specify the
operation performed
on the received doc-
ument.
7
Specify how received
documents are handled.
–
Touch [RX Doc. Set-
tings], select the op-
eration to be
performed, and then
touch [Enter].