Konica Minolta magicolor 4690MF - Manual (Page 44)

Configuration Menu Overview 32
LAMP WARMUP TIME
Setting
AUTO / FIX
Specify the warm-up time for the lamp of the
scanner unit.
If AUTO is selected, the length of time to
recover from Energy Save mode when the
machine is turned on is adjusted according to
the room temperature. Since the machine can-
not be used until its condition is completely sta-
bilized, select this setting, for example, if you
wish to scan at a high image quality from the
first page.
If FIX is selected, the machine can be used
after lamp warm-up is finished. With a low room
temperature, the quality of the first page of a
copy or scanned image may not be as good as
if
AUTO was selected.
BUZZER VOLUME
Setting
OFF / LOW / HIGH
Select the volume of the sound produced when
a key is pressed and of the alarm that is
sounded when an error occurs.
INITIAL MODE
Setting
COPY / FAX
Specify the default mode when the machine is
turned on or when all settings in the control
panel return to their default settings.
TONER EMPTY
Setting
STOP / BW CONTINUE
Select whether or not printing, copying and fax-
ing stop when the toner has run out.
If STOP is selected, printing, copying and faxing
stop when the toner runs out.
If BW CONTINUE is selected, printing, BW
copying and faxing do not stop when the toner
runs out.
TONER NEAR EMPTY
Setting
ON / OFF
When the toner is nearly run out, a warning
message appears.
AUTO CONTINUE
Setting
ON / OFF
Select whether or not printing continues when a
size error occurs during printing.