Konica Minolta magicolor 4690MF - Manual (Page 57)

Configuration Menu Overview 45
SNMP
Setting
DISABLE / ENABLE
Select whether or not to enable SNMP.
SPEED/DUPLEX
Setting
AUTO / 10BASE-T FULL
/ 10BASE-T HALF /
100BASE-TX FULL
/
100BASE-TX HALF
Specifies the transmission speed for the
network and the transmission method
for bi-directional transmission.
E-MAIL
SETTING
SMTP
Setting
DISABLE / ENABLE
Select whether to enable or disable
e-mail transmission operations for this
machine.
SENDER NAME
Specify the name of the E-mail sender
(up to 20 characters) used for network
scanning.
The default setting is “magicolor
4690MF”.
E-MAIL ADDRESS
Specify the E-mail address (up to 64
characters) of the E-mail sender used
for network scanning.
DEFAULT SUB-
JECT
Specify the subject (up to 20 characters)
of the E-mail message used for network
scanning.
The default setting is “from mc
4690MF”
.
SMTP SERVER
ADDR.
Specify the IP address or host name (up
to 64 characters) for the SMTP server.
The default setting is “0.0.0.0”.
SMTP PORT NO.
Setting
1 to 65535 (Default: 25 )
Specify the port number communicating
with the SMTP server.
SMTP TIMEOUT
Setting
30 to 300 sec (Default:
60 sec )
Select the amount of time (in seconds)
until the connection with the SMTP
server times out.