Replacing the transfer belt unit, Replacing the transfer belt unit 174 – Konica Minolta magicolor 4690MF User Manual
Page 186
Advertising
Replacing Consumables
174
Replacing the Transfer Belt Unit
When the time to replace the transfer belt unit is reached, the message
Trans. Belt Life
appears. Printing can continue even after this mes-
sage appears; however, since the print quality is reduced, the transfer belt
unit should be replaced immediately.
1
Turn off the machine and discon-
nect the power cord and inter-
face cover.
2
Pull the lever, and then open the
right side cover.
"
Before opening the right
side cover, fold up Tray 1.
Advertising