Adding a new speed dial (ftp server) setting – Konica Minolta IF-118 User Manual
Page 73
3
Getting Ready
3-46
IF-118
Specifying the Setting for Speed Dialing (FTP Server)
From the page displayed by clicking “File Destination Setting” in the menu
on the “Scan” tab, FTP servers can be specified for speed dial numbers
on the copier.
Adding a New Speed Dial (FTP Server) Setting
1
Start up PageScope Light.
❍
Refer to “Using PageScope Light” on page 2-14.
2
Log in to the Administrator mode.
3
Click “File Destination Setting” in the menu on the “Scan” tab.
2
One-Touch Dial Index
Click an index number to jump to the corresponding one-
touch dial list.
3
Speed Dial Index
Click an index number to jump to the corresponding speed
dial list.
1
3
4
2
1
No.
Speed dial number (201 to 210)
2
Destination Name
FTP server name
3
Address
FTP server address
4
[Delete] button
Click this button to delete the selected speed dial setting.