Specifying settings for one-touch dialing, 2 using pagescope light to add addresses – Konica Minolta IF-118 User Manual
Page 65
Advertising
3
Getting Ready
3-38
IF-118
3.3.2
Using PageScope Light To Add Addresses
Specifying Settings for One-Touch Dialing
From the page displayed by clicking “One-Touch Dial Setting” in the menu
on the “Fax” tab, one-touch dial settings for the copier can be specified.
1
2
3
4
5
1
No.
One-touch dial number (01 to 27)
2
Name
The name of the destination for the one-touch dial setting
3
Destination address
The address programmed for the one-touch dial setting
Depending on the type of destination, this address can be
a fax number or an e-mail address.
4
Timer Transmission
The send time is displayed for one-touch dial settings
specified for time transmission.
5
[Delete] button
Click this button to delete the selected one-touch dial
setting.
Advertising