2 using the original glass, Using the original glass -4 – Konica Minolta IF-118 User Manual
Page 81
4
Using Scan to E-mail Operations
4-4
IF-118
4.1.2
Using the Original Glass
1
Press the [SCAN] key.
The copier switches to Scan mode,
and the Scan screen appears.
2
Open the original and place the
document on the original glass.
❍
Load the document with the
surface to be scanned face
down.
❍
Align the document with the
scale marks at the top and left
side of the original glass.
3
Press the [123/ABC] key.
4
Press the keys on the 10-key pad to
enter the e-mail address, and then
press the [YES] key. The e-mail
address can also be specified using
one of the following methods.
❍
“Specifying the Destination Using One-Touch Dial Keys” on
page 4-10.
❍
“Specifying the Destination Using Speed Dial Numbers” on
page 4-11.
❍
“Specifying the Destination Using the Tel Book {Phone Book}” on
page 4-13.
❍
To skip specifying the subject line, CC address, resolution, etc.,
press the [START] key, instead of the [YES] key.