Konica Minolta bizhub 420 User Manual
Page 161
Advertising
Setting Up the PCL Driver
5
IC-204
5-29
7
Specify the storage location for the overlay data, and then enter the file
name in the “File name” box.
8
Click the [Save].
9
Select the file, and then click the [OK].
–
The Print dialog box appears again.
10
Click the [OK].
Instead of executing a print job, the overlay data is saved. The file ex-
tension is “.kmf”.
2
Note
From the Overlay tab, the selected overlay data can be deleted by click-
ing the [Delete Overlay File].
Advertising
This manual is related to the following products: