Selecting a paper source -7 – Konica Minolta bizhub 420 User Manual
Page 191
Advertising
Setting Up the KONICA MINOLTA PS Driver (Windows)
6
IC-204
6-7
Selecting a Paper Source
Paper source can be changed or paper type can be set as follows.
1
Click the Setup tab.
2
Select a paper source to be used with [Paper Source].
–
Follow the procedure below to set the paper type for the “Paper
Source”.
–
When using Transparency Interleave, refer to p. 6-9
3
Click the [Paper Type Settings].
Advertising
This manual is related to the following products: