Konica Minolta Fujitsu Scanner - Manual (Page 124)

104
4.3 Cleaning the Rollers (using the cleaning sheet)
5. Set the side guide of the hopper to B4 width.
For details, refer to “2.6 Loading Documents on the Hopper” on page 17.
6. Pull out the stacker extension and adjust it to the length of the cleaning
sheet.
For details, refer to “2.7 Setting up the Stacker” on page 22.
7. Remove the protective paper from the cleaning sheet.
8. Place the same cleaning sheet with the adhesive side facing up on the
hopper table, aligning its left side with the side guide, as shown in the
illustration below.