Konica Minolta Fujitsu Scanner - Manual (Page 204)

184
8.8 Page Edge Filler (Automatic paper size detection)
HINT
The “Automatic Paper Size Detection” setting can be configured on the
scanner driver setting window.
For details on how to set the setting, refer to
“3.8 Correcting skewed Docu-
ments” on page 90
ATTENTION
Note that if the Page Edge Filler is too wide, some characters in the vicinity
of the boundary may be cut.
When you scan the document based on the other settings than “Automatic
paper size detection”, “Paper Edge Filler (ADF)” automatically becomes
valid instead of this setting.