3 scanning documents with different widths – Konica Minolta Fujitsu Scanner User Manual
Page 93
Advertising
73
3.3 Scanning Documents with different widths
3
SCANNI
NG V
A
RIOUS TYPES OF DOC-
3.3 Scanning Documents with different
widths
When you scan a batch of documents with different widths, follow the instruction below.
1.
Align the leading edge of the documents.
This section describes the procedure to align the document alongside their center line.
For the procedure to align the document with its left (or right) edge, refer to
document by either Side Guide of the hopper.” on page 19.
2.
Load the documents on the center of the hopper.
Aligning the document
alongside their center line
Aligning the document
with its left (or right) edge
Pick roller
Advertising