Konica Minolta KIP 9000 - Manual (Page 60)

Chapter 2 Basic Operations 2-37
2. 8. 4 User Mode 4 (Cold Sleep Mode timer setting)
[Function]
It is possible to set the Cold Sleep timer. If the KIP 9000 does not receive any print/copy for the
time set as timer in User Mode 4, it will go into the Cold Sleep Mode to save the power
consumption.
[Operation]
1. Press the [ MENU ] Key 4 times to select the User Mode 4. [ MENU ] Key lights green and the
Status Display indicates “U4.”.
Press [ MENU ] 4 times.
MENU ENTER ONLINE
MENU ENTER ONLI NE
NOTE
If the Cold Sleep does not start even if the time specified in
User Mode 4 has passed, the Cold Sleep Mode may be set to
OFF. If there is a dot beside the timer value, the Cold Sleep
Mode is set to OFF (inactive). Call the service personnel to
set it to ON. (User can not change this setting.)
Dot (Cold Sleep is OFF)
MENU ENTER ONLI NE
Cold Sleep Mode is a power saving mode that can save more power than Warm Sleep Mode.
It works when the KIP9000 has not printed for the time the timer specifies. Power consumption
is reduced greatly by completely shutting off supplying the power to the fuser unit. The Cold
Sleep Mode will be cancelled automatically when a print job or a copy job is sent. However it
may take time until the KIP9000 starts printing as it needs to recover the temperature of the
fuser. (Printing does not start until the KIP9000 is ready) Note that the Cold Sleep Mode will
require longer recovering time than Warm Sleep.
Reference