Konica Minolta BIZHUB C30P - Manual (Page 52)

6 Configuring PageScope Net Care Settings
41
• SNMPv3 Table: Add or remove user names, context names,
and port numbers used when searching for
devices compatible with SNMPv3.
(Refer to “To add settings used with a search
for devices compatible with SNMPv3” (p. 45)
and “To remove settings used with a search
for devices compatible with SNMPv3”
(p. 45).)
Important!
Device Discovery section
• Auto Discovery : Select this check box to enable automatic
rediscovery of devices on the network.
• Auto Discovery Interval (hour) :
When Auto Discovery above is checked,
enter the auto discovery interval time in
hours.
• Last Discovery Start Time :
Shows the start time of device re-discovery.
• Last Discovery Finish Time :
Shows the finish time of device re-discovery.
• Start Discovery : Click the Start button to start device
discovery.
• Enable Generic Device Discovery :
Select this check box for discovery of RFC-
1759 Printer-MIB compatible devices.
• When searching for devices compatible with SNMPv3, the
security level must be set to No Auth/No Priv .