Aspire Digital 2010 - Manual (Page 65)

Chapter 3 Aspire 2010/2020
This chapter contains step-by-step procedures on how to disassemble the notebook computer for
maintenance and troubleshooting.
To disassemble the computer, you need the following tools:
T
Wrist grounding strap and conductive mat for preventing electrostatic discharge
T
small Philips screwdriver
T
flat head screwdriver
T
Philiips screwdriver
T
nut screwdriver
T
tweezers
NOTE: The screws for the different components vary in size. During the disassembly process, group the
screws with the corresponding components to avoid mismatch when putting back the components.
When you remove the stripe cover, please be careful not to scrape the cover.
NOTE: This chapter will base on Aspire 2000 to modify. If you need to read the mpeg files please refer to
Aspire 2000 Service CD, and the P/N is VD.A20V5.001
Chapter 3
Machine Disassembly and Replacement