Including more systems in your storage space – Adaptec Storage Manager User Manual
Page 56
Step 4: Building Your Storage Space
●
55
10
Click Apply, then click Yes.
Adaptec Storage Manager builds the logical drive(s). The
configuration is saved on the Adaptec controller and on the physical
drives.
11
Repeat Steps
for each controller on your system.
12
Partition and format your logical drives. See
information.
If your storage space comprises one or more Adaptec RAID controllers
on a single computer, building is complete. Continue with
.
If you have installed Adaptec RAID controllers on more than one
computer and wish to add them to your storage space, continue with
Including More Systems in Your Storage Space
below.
Including More Systems in Your Storage Space
If you have installed Adaptec RAID controllers on more than one
computer, to continue building your storage space:
●
From each individual computer, log in to Adaptec Storage Manager
and repeat Steps
to continue building your storage space, or
●
From your local system, log in to all the other computers as remote
systems (see
page 61
), then repeat Steps
to continue building
your storage space.
Note:
The maximum number of supported RAID controllers varies
depending on your operating system. See
for more information.
When your storage space is complete, continue with