Xerox 4595 con Xerox FreeFlow DocuSP Print Controller-15553 - Manual (Page 185)

Xerox 4595 Copier/Printer System Administration Guide 8-27
8. Setups
4. Select the desired setting for the specific Audio Tone feature.
5. Select
Save
.
Control Panel Select Tone
Select the volume level that sounds when a button displayed on
the screen is correctly selected. Select from
Loud
,
Normal
, and
Soft
. To disable the sound, select
Off
.
Control Panel Alert Tone
Select the volume level that sounds when a non-functioning (or
grayed-out) button is selected or when an error occurs. Select
from
Loud
,
Normal
, and
Soft
. To disable the sound, select
Off
.
Base Tone
For a button that toggles (the setting changes each time it is
pressed), select the volume level that sounds when the button is in
its initial (first) position. This is the sound made when the
Interrupt
button is released. Select from
Loud
,
Normal
, and
Soft
. To
disable the sound, select
Off
.
Machine Ready Tone
Set the volume level that sounds when the machine is ready to
copy or print or after the machine powers on. Select from
Loud
,
Normal
, and
Soft
. To disable the sound, select
Off
.
Copy Job Complete Tone
Select the volume level that sounds when the machine
successfully completes the copy cycle. Select from
Loud
,
Normal
, and
Soft
. To disable the sound, select
Off
.
Non-Copy Job Complete
Tone
Select the volume level that sounds when the machine completes
a job other than a copy job. Select from
Loud
,
Normal
, and
Soft
.
To disable the sound, select
Off
.