Xerox 4595 con Xerox FreeFlow DocuSP Print Controller-15553 - Manual (Page 63)

Xerox 4595 Copier/Printer System Administration Guide 3-15
3. Using CentreWare Internet Services
LPD
This section describes the settings available for the LPD feature.
1. Start a web browser.
2. Type the IP address or the Internet address for the machine in
the address bar on the browser, and press the
Enter
key.
• Example of the IP address entry:
http://192.168.1.1/
• Example of the Internet address entry:
http://xxx.yyyy.zz.vvv/
NOTE: When specifying a port number, add ":" and a port
number to the end of the Internet address.
3. Click the
Properties
tab.
4. Click
+
on the left of
Protocol Settings
to display the items in
the folder.
5. Click
LPD
.
6. Set the
Port Number
.
7. Select the
Enable
check box to enable the
TBCP Filter
.
8. Set the
Connection Time-Out
.
9. Reflect the values as the machine’s setting values.
a. Click the
Apply New Settings
. A screen to enter the user
name and password will be displayed.
b. Enter the System Administrator UserID and password into
User Name
and
Password
, and then click
OK
.
NOTE: The default User ID value is 11111 and password is x-
admin.
c. The right frame on the web browser will change to the
machine reboot display.
d. Click
Reboot
. The machine will reboot and the setting
value will be reflected.