Asante Technologies 1000 - Manual (Page 35)

Viewing Group Information
Page 4-11
Viewing Group Information
The Slot Configuration Table displays and allows you to modify group
information about the SuperStack II Switch 1000. The group informa-
tion contains details about the device as if it were a part of a device
stack.
∆
Note: The SuperStack II Switch 1000 is a stack-
able switch. In a stack of switches, each switch in
the stack is referred to as a “group.”
To view/configure the Slot Configuration Table:
1
Do not select any item on the Device Page’s front
panel image. (This selects the entire device.)
2
Click Slots.
The Slot Configuration Table appears, similar to Figure 4-9.
Figure 4-9 Slot Configuration Table
∆
Note: For a description of each field, see “Slots”
on page 6-9.
3
To modify information, click once on a row entry.
4
Click Modify.
The Modify Dialog box appears.
▲ Important: Only those fields that contain drop-
down menus can be edited.
5
Click Apply.
To view updated information, click Refresh.
book Page 11 Thursday, September 4, 1997 3:47 PM