Asante Technologies 1000 - Manual (Page 75)

Graph
Page 6-19
Field Description
Statistics
(continued) Group Statistics
❏
Readable Frames — displays the total number
of good or readable frames (frames without
error).
❏
Unicast Frames — displays the number of
frames seen by the card that is addressed to a
unicast (non-card) address.
❏
Broadcast Frames — displays the total num-
ber of frames that were successfully received
and were directed to the broadcast group
address.
❏
FCS Errors — displays the number of frames
that failed Cyclic Redundancy Check (CRC).
❏
Alignment Errors — displays the number of
frames that were an integral number of octets
in length and did not pass the FCS check.
❏
FramesTooLong — displays the number of
frames that exceeded 1,518 bytes.
❏
Short Events — displays the number of data
bursts, (data is less than 10 bytes in length).
❏
Runts — displays the number of frames
shorter than 64 bytes.
❏
Auto Partitions — displays the number of
times the device has automatically partitioned
a port.
❏
Total Errors — displays the total number of
errors which have occurred on all ports on all
groups in this device.
Port Statistics
❏
Readable Frames — displays the total number
of good or readable frames (frames without
error).
❏
Transmitted Frames — displays the number of
frames (including error frames) which were
transmitted by ports in this workgroup.
❏
Filtered Frames — displays the total number
of frames within a workgroup that were fil-
tered because the destination station was on
the same segment (port) as the source station.
book Page 19 Thursday, September 4, 1997 3:47 PM