Xerox WorkCentre M118i-6288 - Manual (Page 141)

Print Settings
Xerox CopyCentre/WorkCentre 118 User Guide 141
data received, then interprets and prints the data correctly. When [PCL] or [PS] is
selected, the data received from the PC is processed as each of these respective
data types.
• PJL – PJL commands are required when printing using the print driver. Specify
whether to [Enable] or [Disable] PJL commands that are sent from the PC.
• Connection Time-Out – Specify the period of time the machine fails to receive or
send data before connection time-out is activated. Connection time-out can be set
within the range of 2 to 3600 seconds in 1 second increments.
• Port No. – Specify the port number 9100 or within the range 8000 to 9999.
• TBCP Filter – Specify whether to [Enable] or [Disable] the TBCP filter when the
PostScript data is processed.
UPnP
Use to set up UPnP (Universal Plug and Play).
• Port Status – Specify whether to [Enable] or [Disable] the port status of UPnP.
SNMP
Use to set up SNMP. The settings for SNMP are required when using applications for
remote managing multiple printers.
• Port Status – Specify whether to [Enable] or [Disable] the port status of SNMP.
• Transport Protocol – Specify the transport protocol to be used for SNMP. Select
[UDP], [IPX], or both.
• Community(R)
*1
– Enter the community name for retrieving the manage information
on base (MIB) of the printer up to 12 characters.
• Community(R/W)
*1
– Enter the community name for configure the manage
information on base (MIB) of the printer up to 12 characters.
• Community(Trap) *1 – Enter the community name used for trap up to 12 characters.
TCP/IP Settings
• Get IP Address – Specify whether to automatically or manually retrieve the
necessary information for using TCP/IP (IP address, subnet mask, and gateway
address) from the DHCP (Dynamic Host Configuration Protocol) server with AutoIP
feature, DHCP server, BOOTP, or RARP. For the addresses you need to set
manually, contact the Key Operator.
• IP address, Subnet Mask, Gateway Address – These items are used to confirm the
automatically acquired address or manually set address. Enter addresses in the
format xxx.xxx.xxx.xxx. xxx is within the range of 0 to 255.
Internet Services
Specify whether or not to use Internet Services. When [Enable] is selected,
CentreWare Internet Services can be used to display the machine status or job status,
or change machine settings via a Web browser.