Xerox WorkCentre M118i-6288 User Manual
Page 191
Fault Codes
Xerox CopyCentre/WorkCentre 118 User Guide
191
016-501
POP3 server name is not set correctly when using POP3 protocol.
Check if the POP3 server was set correctly.
016-502
Failed to login to POP3 server when using POP3 protocol. Check if the
user name and password used for the POP3 server are set correctly.
016-503
SMTP server name is not set correctly when e-mail was transmitted.
Check if the SMTP server was set correctly. Also, check that the DNS
server is set correctly.
016-504
POP3 server name is not set correctly when e-mail was transmitted.
Check if the POP3 server was set correctly. Also, check that the DNS
server is set correctly.
016-505
Failed to login to POP3 server when transmitting e-mail. Check if the
user name and password used for the POP3 server are set correctly.
016-701
PCL print data could not be processed because of insufficient memory.
Lower the resolution, or process without setting double-sided or
Multiple-Up printing.
016-702
PCL print data could not be processed because of insufficient print page
buffer. Take one of the following actions.
• Lower the resolution the printer driver.
• Increase the size of the print page buffer.
• Add on memory.
016-709
An error occurred while ART EX processing. Instruct the machine to
print again.
016-719
There is insufficient memory used for PCL. Increase the memory.
016-720
A PCL command error occurred. Check the print settings, or correct the
PCL command.
016-721
An error occurred while printing job. Instruct the machine to print again.
If an error cannot be resolved, contact the Xerox Welcome Center.
016-726
The print language could not be selected. Select print language.
016-730
An unsupported command was detected. To print again, check the print
data and delete the command that caused the error.
016-732
The form specified in the emulation setting is not registered in the host
computer. Resend the form data.
016-744
The machine could not print the PDF file because it contains features
not supported in the machine. Open the file in Adobe Reader and select
[Print] from the [File] menu to print it.
016-749
A PJL command syntax error occurred. Check the print settings, or
correct the PJL command.
016-751
The machine could not print the PDF file using ContentsBridge Utility.
Open the file in Adobe Reader and select [Print] from the [File] menu to
print it.
Code
Description and Corrective Action